Set Wrap Disable switch to on position and stow lift using control pendant. Platform must fold into vertical position and move into vehicle, but not wrap (Figure 1-3). • Deploy lift to floor level. Set Wrap Disable switch to off position and stow lift using control pendant. Platform must fully fold and wrap into vehicle (Figure 1-4). Handrail
FEATURES: Fixed control and pendant control Platform auto-levelling The MBB F 600 L is a compact tail lift with a foldable platform and a loading capacity of up to 600kg. This results in an optimal weight-to-capacity ratio.
Manual Platform Lift Truck, Load Capacity 500 lb, Minimum Lifting Height 1/4 in, Maximum Lifting Height 55 in, Platform Length 20 in, Platform Width 20 in, Lift Control Hand Winch, Lift Mechanism Chain/Cable, Base Style Fixed, Base Inside Width 22 in, Base Outside Width 30 3/4 in, Frame Finish Powder Coated, Frame Type Flat Back, Load Center 10 in, Overall Height with Platform Raised 66 1/2 in
Jul 01, 2018 · for smooth steel platforms (2002 and older) increases consistency of motion in cold climates standard fixed control + remote pendant control set of four (one-piece platform), set of six (two-piece platform) specify hinged side, not available for two-piece platforms top bracket and gussets only (one set included with liftgate)
Item 1: One (1) 1 Ton 4X4 Truck Chassis & Cab - Ford F350 Super Duty, Extruded aluminum platform Fixed control switch & remote pendant control
Floor-operated crane means a crane which is pendant or nonconductive rope controlled by an operator on the floor or an independent platform. 1910.179(a)(6) Gantry crane means a crane similar to an overhead crane except that the bridge for carrying the trolley or trolleys is rigidly supported on two or more legs running on fixed rails or other
Jul 09, 2012 · Cranes for construction are normally temporary structures, either fixed to the ground or mounted on a purpose built vehicle. They can either be controlled from an operator in a cab that travels along with the crane, by a push button pendant control station, or by radio type controls.
Platform Lift Trucks 51 products Platform lift trucks have a stable, flat platform that supports smaller loads, bulk goods, or irregularly shaped items that are not stored on Perfects or skids, and they have a lifting mechanism that raises the loaded platform.
DBP Series Double Scissor High Lift. Available in 1,000 and 1,500 lb. Capacities. Lift Heights to Over 59". Pendant Control. 2 Fixed / 2 Swivel Caster. Standard Platforms Up To 28" x 48".Perfectr Platforms Available. 12 Volt AGM Battery. Built-in 5 Amp Charger.
elevating work platforms. (6) Telescopic/hydraulic gantry systems. (7) Stacker cranes. (8) Powered industrial trucks (forklifts), except when configured to hoist and lower (by means of a winch or . hook) and horizontally move a suspended load. (9) Mechanic’s truck with a hoisting device when used in
Planetary winch speed at 60'/minute with 7/16" cable and double-acting cylinders with integral holding valves and filters. Crane comes with crane hook, snatch block, anti-two block device, boom support, RF wireless remote with back up pendant control, and in cab control panel included.
Note: If your gate includes a pendant control, the operation of the pendant will be the same but the "LIFTGATE ACTIVATED" timer will be 90 seconds. 5. To lower the liftgate, stand off to the side, well clear of the liftgate, and push down on the control toggle. The platform will rotate under the truck as the liftgate is lowered. 6.
Pendant controls allow the operator to see the entire bank as it opens and closes— an important safety precaution. The pendant control can be easily removed to prevent unauthorized use. Pendent Power
Our new and improved pendant control offers single hand operation from in or out of the cab of the truck, allowing a single operator to load and unload a body in a matter of minutes. We’ve also integrated a swivel hook on the end of our winch for improved cable spooling and body attachment, as well as a cable hook stow location on either side
Fixed Axle: An axle which is fixed in the end truck and on which the wheel revolves. Floor-Operated Crane: A crane that is pendant controlled by an operator on the floor or an independent platform. Footwalk: The walkway with handrail and toeboards attached to the bridge or trolley to access the crane. Gantry Crane:
